Configuring Library Options; Table 8 Available Settings, Configure: Options Screen - Quantum P1000 Series User Manual

Chapter 4 Operator Commands

Configuring Library Options

Table 8 Available
Settings, Configure:
Options Screen
62
Configuring Library Options
The Configure Options command allows you to set the following
options (see table 8).
Option Settings
Power-On Online
Offline
Auto Clean Enable
Disable
Retries Enable
Disable
Auto Inventory Enable
Disable
Barcode Labels Enable
Disable
Temp. Detection Enable
Disable
Auto Load Disable
Enable
Power-On Security User
Locked
Import Only
Operator
4/52 Identity Enable
Disable
ATL P1000 Series User's Guide
Description
This setting determines whether the
library will be on-line or off-line
when it is powered up.
When this option is enabled, the
library performs drive cleaning tasks
automatically when required.
When this option is enabled, the
library retries a failed command
automatically before issuing an error
message.
When this option is enabled, the
library performs an inventory
automatically upon power-up.
When this option is enabled, the
library scans bar codes during
inventory. Disable this option when
using unlabeled cartridges.
When this option is enabled, the
over-temperature detection warning
and shut down features of the library
are activated.
When this option is enabled, the
library automatically moves any
cartridge placed in the load port into
an empty cartridge bin.
This option sets the security level
that will be used when the library is
initially powered up.
For a description of these security
levels, see "Changing the GUI
Security Level" on page 49.
When this option is enabled, the
library returns the same inquiry
string as the ATL 4/52 library.
4