Removing The Internal Packing Materials - Quantum P1000 Series User Manual

Removing the Internal
Packing Materials
This section explains how to remove the internal packing materials
that protect the library during shipping and installation.
2
Caution: Before removing the internal packing materials, verify that
the library is at its final installation site. Moving the library
without these materials in place may damage the library.
Caution: Take precautions to prevent electrostatic discharge
whenever you remove the library enclosure or open the
library doors.
Opening the Doors
To open the library doors:
Procedure
Locate the key in the accessories kit and unlock the front door of
1
the library.
Open the left door first, then open the right door.
2
Removing the Load and Bulk Packs
To remove the load and bulk packs (see figure 20):
Procedure
Grip the load pack handles and squeeze them together.
1
This releases the latches securing the load pack.
Still holding the load pack handles, pull the load pack forward and
2
out of the library.
Repeat steps 1 and 2 to remove the bulk pack.
3
ATL P1000 Series User's Guide
Chapter 2 Installing the P1000 Library
Unpacking the P1000
2
2
27