Configuring And Testing The Library; Table 3 Sample Library Configuration - Quantum P1000 Series User Manual

Chapter 2 Installing the P1000 Library

Configuring and Testing the Library

Table 3 Sample Library
Configuration
40
Configuring and Testing the Library
When you finish installing the library, make any desired changes to the
library configuration and then calibrate the library and test its
functionality.
Table 3 shows a sample library configuration.
Item
Model number
Number of bins (fixed storage and load pack)
Number of drives
Library SCSI ID number
Drive 0 SCSI ID number
Drive 1 SCSI ID number
Drive 2 SCSI ID number
Drive 3 SCSI ID number
Library power-up state
Automatic drive cleaning function
Retry move command
Auto load from load port
Auto inventory at power up
No bar code scan
4/52 identity
To view and make changes to the configuration or to calibrate the
library, see chapter 4. To test the library, see chapter 5.
Note: You must have either Operator or Service access privileges to access
the options described in chapter 4 and Service access privileges to
access the options described in chapter 5.
ATL P1000 Series User's Guide
2
Sample Default
Condition
6220000
30
4
0
2
3
4
5
On-line
Disabled
Enabled
Disabled
Enabled
Disabled
Disabled