Tapes Screen; Figure 34 Tapes Screen - Quantum P1000 Series User Manual

Chapter 3 Basic Operations
Obtaining Library Status

Tapes Screen

Figure 34 Tapes Screen

48
Load Pack
The Load Pack section of the Overview screen identifies the cartridges
currently stored in the load pack. Press the arrow buttons at the
bottom of the screen to scroll through the load pack bins and view
their contents.
You can also view this information using the Tapes screen.
To open the Tapes screen, press the Tapes tab on the GUI. Use this
3
screen to determine whether a particular element contains a tape
cartridge, and whether the cartridge is labeled.
ATL
P R O D U C T S
System
Off-line
Standby
Load Port
Load Pack
U
Stop
The Tapes screen is divided into sections by element type. To
determine whether a particular element contains a cartridge, look at
the appropriate section of the screen. For example, to determine
whether there is a cartridge in the gripper, look at the Transport section
of the screen.
The Storage and Load Pack sections contain too many elements to
display on the screen at one time. Use the arrow buttons at the bottom
of these sections to scroll through the section.
You can also expand the Storage or Load Pack sections to fill the screen
by pressing the desired section anywhere above the arrow buttons. To
return to the start of the Tapes screen, press the Back button.
ATL P1000 Series User's Guide
Back Forward
Overview
Drives Storage
00 000
EMPTY ANF 099
01 001
EMPTY ANF 100
02 002
EMPTY ANF 101
03 003
EMPTY ANF 102
Home
Tapes Operator
Load Pack Transport
P00 GRP
ANF 146 EMPTY
P01
ANF 147
Load Port
P02
ANF 148
P03 LP
ANF 149 EMPTY
3