Problem
A move command failed.
A flash memory error is
reported.
A maximum temperature
exceeded warning appears.
ATL P1000 Series User's Guide
Chapter 6 Troubleshooting
Corrective Action
Check the source and destination
1
elements.
The source element should hold the
cartridge to be moved; the destination
element should be empty.
Verify that the gripper is empty
2
and all actuators are free of
obstruction.
Verify that the library is on-line
3
and the Stop button is released.
Retry the command.
4
Contact an authorized field service
engineer.
Turn off the library and allow it to
1
cool down.
Lower the room temperature, if
2
possible, and increase ventilation
around the library.
If the operating temperature is too high,
the library automatically shuts down until
the temperature drops.
Operating Problems
91