Preface - Quantum P1000 Series User Manual

Audience
Purpose
Document
Organization

Preface

This guide was written for operators of the P1000 library.
0
This guide provides procedures for unpacking, installing, operating,
0
and troubleshooting the basic P1000 library with a standard SCSI host
interface.
The optional Fibre Channel capabilities are detailed in a separate series
of documents (see "Related Documents" on page xiv).
This guide is organized as follows:
0
• Chapter 1, "Library Description," provides an overview of the
P1000 components and operation.
• Chapter 2, "Installing the P1000 Library," explains how to unpack
and install the P1000.
• Chapter 3, "Basic Operations," introduces the P1000's touch screen
graphical user interface (GUI) and explains how to obtain library
status, change the GUI security level, and perform several manual
operations such as turning the library on and off and inserting tape
cartridges.
• Chapter 4, "Operator Commands," describes each of the
commands on the Operator screen of the GUI.
• Chapter 5, "Service Commands," describes each of the commands
on the Service screen of the GUI.
• Chapter 6, "Troubleshooting," discusses typical P1000 operating
problems and provides probable solutions.
• Appendix A, "Specifications," provides the physical, performance,
and environmental characteristics of the P1000.
• Appendix B, "Installing the Slide Assembly in the Rack," explains
how to install the slide assembly in the rack (for rack-mount units
only).
This guide concludes with a glossary and an index.
ATL P1000 Series User's Guide
Preface
0
xiii