Chapter 2 Installing the P1000 Library
Unpacking the P1000
Figure 20 Removing the
Load and Bulk Packs
28
Handles
Removing the Shipping Restraint
Note: The shipping restraint that protects the extension axis assembly is
attached to the bottom drive shelf and fits over the supports for the
load and bulk packs.
To remove the shipping restraint:
Procedure
Grasp the front edge of the shipping restraint and carefully push
1
inward at both corners while lifting it up at an angle (see figure 21).
The tab on the shipping restraint (between the mounting blocks for
the load and bulk packs) pops up, releasing the shipping restraint
from the load pack shelf. The back of the shipping restraint
unhooks from the bottom drive shelf.
Lift the shipping restraint off the extension axis assembly.
2
ATL P1000 Series User's Guide
2