Figure 15 Removing The Foam Supports, Stand-Alone Library; Figure 16 Removing The Stand-Alone Library From The Pallet - Quantum P1000 Series User Manual

Chapter 2 Installing the P1000 Library
Unpacking the P1000
Figure 15 Removing the
Foam Supports,
Stand-alone Library
Figure 16 Removing the
Stand-alone Library from
the Pallet
22
Procedure (continued)
Attach the ramp to the pallet using fastener strips (see figure 16).
3
Make any necessary preparations for moving the library.
4
This may involve clearing a path to the installation site, unlocking
doors, and placing mats over carpeted areas.
Carefully roll the library down the ramp.
5
Fastener strips
ATL P1000 Series User's Guide
Foam supports