Testing The Library; Performing A System Test; Figure 35 Report: Autoclean Status Screen - Quantum P3000 Series User Manual

Chapter 4 Service Commands

Testing the Library

Figure 35 Report:
AutoClean Status
Screen
Testing the Library
Performing a
4
System Test
62
Back
About
Quantum|ATL
Tapes
System
Report: AutoClean Status
Off-line
Auto Clean Enabled:
Standby
Auto-Clean State:
Cleaning Operation Count:
Load Port
Bad Operation Count:
Untracked Operation Count:
Last to Drive Error Status:
Last to Load Port Error Status:
Last to Home Error Status:
S
Stop
When you have finished reviewing the report, press the Back
button to return to the Service screen.
The Service screen provides a testing command:
• SysTest—this command tests library operation by swapping
tape cartridges between storage bins or drives.
This screen is meant to be used only by qualified,
Caution:
ATL-trained personnel. It is presented here for
explanation only. SysTest will alter inventory
information.
To perform a system test:
From the Service screen, press the SysTest Library button.
1
Quantum|ATL P3000 Series User's Guide
Forward Home
Operator Service
FALSE
Idle
0
0
0
0 00 00
0 00 00
0 00 00
4