Testing The Library; Performing A System Test; Figure 39 Test: Systest Library Screen - Quantum P2000 Series User Manual

Chapter 4 Service Commands

Testing the Library

Testing the Library
Performing a
4
System Test
Figure 39 Test:
SysTest Library
Screen
64
When you have finished reviewing the report, press the Back
button to return to the Service screen.
The Service screen provides a testing command:
SysTest—this command tests library operation by swapping
•
tape cartridges between storage bins or drives.
Caution: This screen is meant to be used only by qualified,
ATL-trained personnel. It is presented here for
explanation only. SysTest will alter inventory
information.
To perform a system test:
From the Service screen, press the SysTest Library button.
1
The Test: SysTest Library screen is displayed (see
Back
ATL
P R O D U C T S
System
Test: Systest Library
Off-line
Standby
Load Port
S
Stop
ATL P2000 Series Automated Tape Library User's Guide
Forward Home
Operator Tapes
Random
# of Runs:
Swap
_
Bins
Swap
Continuous
Drives
Use
Barcodes
Execute
figure
Service
1 2
3 4
5 6
7 8
9 0
Select
4
39).