Adjusting The Slide Assembly Tray On The Slide Rails; Figure 57 Slide Assembly Tray, Fully Extended - Quantum P1000 Series User Manual

Figure 57 Slide Assembly
Tray, Fully Extended
Adjusting the Slide
Assembly Tray on the
Slide Rails
Intermediate
channel lock
To adjust the slide assembly tray on the slide rails:
Procedure
B
Loosen the inner nuts on both sides of the slide assembly (see
1
figure 58 on page 106).
Access these nuts from underneath the slide assembly tray.
Move the slide assembly tray forward or backward as necessary.
2
ATL P1000 Series User's Guide
Appendix B Installing the Slide Assembly in the Rack
Access hole
Adjusting the Slide Assembly
Intermediate channel
Inner channel lock
Inner channel
105