Table of Contents
Advertisement
SCSI Cabling
Guidelines
SCSI Cabling
Examples
Connecting Host Computers
You are now ready to connect one or more host computers to the
library. You can connect up to five host computers on separate SCSI
busses.
Note: If your library is equipped with the Prism FC210 Router, disregard this
section. Instead, see the ATL PrismFC210 Router Addendum
(PN 6331101).
When connecting the host computer(s) to the library, follow these
guidelines:
2
Connect each host to a SCSI connector on the back panel of the
•
library.
When more than one device is on a SCSI bus, daisy-chain the
•
devices using the SCSI cables from the accessories kit.
Terminate the last device on each SCSI bus.
•
Using these guidelines, you can set up variations of one-, two-, three-,
four-, or five-host configurations.
Note: The SCSI cable(s) to the host computer(s) must be supplied by the user.
This section provides three SCSI cabling examples. Each of these
examples follows the guidelines introduced above.
2
ATL P1000 Series User's Guide
Chapter 2 Installing the P1000 Library
Connecting Host Computers
2
35
Advertisement
Table of Contents
