Security - Polycom ViewStation SP128 User Manual

Chapter 2

Security

© Polycom, Inc.
Camera 2 Input: Selects the type of composite or S-video
camera input. Choices are:
• Document Camera
• VCR, DVD or other compatible camera.
Note AMX and Creston camera selection - If you are using AMX
or Creston systems to control the ViewStation SP via
infrared signals, the camera selection method for the
remote control has been changed to prevent ambiguous or
accidental camera selection. A change to your room
controller software is required.
The Security screen (System Info > Admin Setup > Security)
shown in Figure 2-45 is used to set the ViewStation SP passwords.
Use of passwords is not required for the ViewStation SP.
Admin Password: Set the password used to access the
ViewStation SP web interface.
Meeting Password: The meeting password is used to grant or
limit access to the non-administrative features to the ViewStation
SPs web interface.
Software Update Password: The purpose of the software
update password is to prevent accidental updating of the
ViewStation software from the far site. This password is
Figure 2-45. Security Screen
69
Optional Configurations
ViewStation SP User Guide