Viewstation Sp128 Line Indicators; Placing A Video Call - Polycom ViewStation SP128 User Manual

Chapter 3

Placing a Video Call

© Polycom, Inc., 2001
Figure 3-3. ViewStation SP384 Main Calling Screen
If the ViewStation SP is checking the ISDN lines and the icons do not
disappear, check the connection of the ViewStation SP and the
configuration of your ISDN lines.

ViewStation SP128 Line Indicators

Each time the ViewStation SP128 is powered on, the network status
indicators are displayed below the Video Call icon on the Main
Calling screen. The icon flashes a yellow numbered box while the
ViewStation SP checks the availability of the network line. If the icon
turns to a red down arrow, check the cable connection or contact the
network manager.
The icon turns green when the ViewStation SP has verified the
network line and is ready to place a video call. After a few seconds,
the icon disappears. These icons remain visible while the
ViewStation SP is checking the status of or there is a problem with
the network.
There are four ways to place a video call:
• Manually
• Using speed dial
• Dialing from the web interface
• Using the address book.
75
Using the ViewStation SP
ViewStation SP User Guide