Call Preference - Polycom ViewStation SP128 User Manual

Chapter 2
ViewStation SP User Guide
selected as the country. If the ViewStation SP is connected to an
internal phone system (PBX), a SPID might not need to be
entered.
Note If the ViewStation SP is unable to find the SPIDs, check the
network connection and verify that the ISDN numbers have
been entered correctly:
• Enter the SPID numbers provided by the ISDN service
provider.
• If the ViewStation SP is connected to a PBX, select the
PBX icon, since you might not need to locate SPIDs.
To auto-detect the SPID numbers, highlight the Start icon and
press the SELECT button on the remote control.
Note If this process is canceled, the ViewStation SP reboots and
the entire setup procedure must be redone.
ISDN Dialing Prefix: The ISDN dialing prefix is used to access
an outside line if the ViewStation SP is connected to a PBX.
Figure 2-18. ISDN Video Network Screen

Call Preference

The Call Preference screen (System Info > Admin Setup > Video
Network > Call Preference) shown in Figure 2-19 determines how
a video call is made. The two types of calls made are:
40
Optional Configurations
www.polycom.com