Getting Started; What You Need To Get Started; Television Monitors; Power Source - Polycom ViewStation SP128 User Manual

Getting Started

What You Need to Get Started

Television Monitors

Power Source

© Polycom, Inc.
This chapter explains how to use the remote control, set up the
ViewStation SP and configure the ViewStation SP for a specific
network interface.
The following items are required:
• A television monitor
• A network connection
• A power source.
Additionally, the following items are required for each ViewStation
SP as listed below:
• ViewStation SP384 with Triple BRI network interface module -
Three ISDN lines from the ISDN service provider and an
optional Ethernet LAN connection if H.323 videoconferencing is
used.
• ViewStation SP128 - An ISDN line for up to 128 Kbps video
communications and an optional Ethernet LAN connection if
H.323 is used.
Any S-Video or composite television monitor with RCA input ports
may be used with the ViewStation SP. The size of the television
monitor should be proportional to the size of the room where the
ViewStation SP is used.
The ViewStation SP has an auto-sensing 62 watt external power
supply which supports line voltages between 100 and 240 VAC, 50
to 60 Hz.
1
1
ViewStation SP User Guide