Viewstation Sp128 - Polycom ViewStation SP128 User Manual

Chapter 2
ViewStation SP User Guide
To set the audio protocol, use the + and - zoom buttons on the
remote control to move the slider.
Changing the audio quality preferences in a call can only be done
in an H.320 call. No changes can be made while in an H.323 call.
Figure 2-41. Audio Quality Screen
Acoustic Plus 716:
• Checked: Polycom's Acoustic Plus
provides low bit rate, wide band audio (7 KHz/16Kb) quality
without compromising video quality.
• Not checked: Disables the acoustic plus feature.

ViewStation SP128

The Audio screen (System Info > Admin Setup > Audio) is used
to configure the following audio properties:
Country Code: Enter the country code assigned to the country
for the ViewStation SP.
Area Code: Enter the Area or STD Code for the ViewStation SP.
Room Telephone Number: Enter the phone number assigned to
the room for the ViewStation SP.
64
Optional Configurations

audio technology
www.polycom.com