Adjusting Cameras And Sound; Selecting Viewstation Sp Cameras - Polycom ViewStation SP128 User Manual

Chapter 3

Adjusting Cameras and Sound

Selecting ViewStation SP Cameras

ViewStation SP User Guide
This section describes how to adjust the cameras and sound
properties on the ViewStation SP which includes the following:
• Selecting ViewStation SP Cameras, on page 88.
• Pan, Tilt, and Zoom for the ViewStation SP Camera, on
page 90.
• Setting Camera Presets, on page 90.
• Automatic Voice Tracking, on page 91.
• Automatic Tracking of Camera Presets, on page 91.
• Adjusting Sound, on page 91.
• Positioning the Microphone Pod, on page 92.
Before a camera can be panned, tilted, or zoomed, the target
camera must be selected, complete the following to adjust the near
site camera:
1. Press the NEAR button on the remote control
2. Select 1 or 2 for the desired camera.
The ViewStation SP displays the camera's current view full screen
on the television monitor. A Camera icon facing toward you is
displayed at the top right of the screen.
Figure 3-11. Near Camera Icon
During a call, the camera at the far site may be adjusted only if the
far site has its Far Control of Near Camera option enabled. Other
sites can control the camera on your ViewStation SP if this option is
enabled. For more information, see "Video/Camera," on page 66.
88
Using the ViewStation SP
www.polycom.com