Polycom ViewStation SP128 User Manual page 97

Chapter 3
© Polycom, Inc., 2001
Figure 3-6. Speed Dial Screen
2. The Speed Dial screen displays a maximum of six speed dial
entries. There are two ways to select a entry listed on the Speed
Dial screen:
• Use the remote control's numeric keypad to select the
number of the speed dial entry you want to dial.
The speed dial entry's number appears at the top left corner
of the entry.
• Use the ARROW buttons on the remote control to highlight
the desired Speed Dial entry corresponding to the number
of the speed dial entry and press the SELECT button on the
remote control.
To keep a specific entry on the Speed Dial screen, do the
following:
1. Select a number 1-6.
2. Press the # button on the remote control. A Lock icon
appears on the right side of the box for that number.
3. Press the # button to toggle between locked and
unlocked.
Complete the following to add an entry from the address book to
the Speed Dial screen:
1. Press the * button on the remote control to jump to the
Address Book screen.
OR
79
Using the ViewStation SP
ViewStation SP User Guide