Dialing Speeds - Polycom ViewStation SP128 User Manual
Polycom viewstation sp128: user guide
Hide thumbs
Also See for ViewStation SP128:
- User manual (250 pages) ,
- Release note (4 pages) ,
- Brochure (2 pages)
Table of Contents
Advertisement
Chapter 2
© Polycom, Inc.
Figure 2-27. Gatekeeper Screen
Note
A gatekeeper is not required to make IP to IP Intranet calls.
If Specify or Auto is selected, one of three icons appears on the
ViewStation SP Main Calling screen when the ViewStation SP is
rebooted. These icons are:
•
Red Down Arrow: Cannot find gatekeeper.
•
Yellow Box: Found gatekeeper, but not allowed to register.
•
Green Up Arrow: Found gatekeeper and registered.
Dialing Speeds
The Dialing Speeds screen (System Info > Admin Setup >
LAN/H.323 > Dialing Speeds) shown in Figure 2-28 is used to set
the IP and ISDN dialing speeds for the ViewStation SP.
•
Nx56 and Nx64 (left side of screen) represent the dialing speeds
for ISDN (H.320) calls.
•
IPx56 and IPx64 (right side of screen) represent the dialing
speeds for IP (H.323) calls.
The 2x options listed under IPx56 are used for gateway calls from
the ViewStation SP. Non-2x options provide connection speeds from
56 Kbps to 768 Kbps.
49
Optional Configurations
ViewStation SP User Guide
Hide quick links:
Advertisement
Table of Contents
