Snmp - Polycom ViewStation SP128 User Manual

Chapter 2
© Polycom, Inc.
IP Precedence: Specifies the priority given IP packages sent
from the ViewStation SP. For IP precedence to work, all routers
on the network MUST be configured to allow IP precedence.
System is behind a NAT: This option instructs the ViewStation
SP to use the IP address that appears in the NAT Outside (WAN)
Address field as its external IP address. When using a Virtual
Private Network (VPN) for your network connection, make sure
that System is behind a NAT is not selected.
Auto discover NAT: This options automatically assigns the WAN
IP address to place calls outside the WAN.
NAT outside (WAN) address: Specify the external IP address
used by the NAT if ViewStation SP is unable to discover the
external IP address automatically.
For more information about configuring the ViewStation SP for
operation behind a NAT (Network Address Translation.) See
"Network Address Translation," on page 147.

SNMP

The SNMP screen (System Info > Admin Setup > LAN > SNMP)
provides for remote management from an SNMP console.
Figure 2-30. SNMP Setup Screen
51
Optional Configurations
ViewStation SP User Guide