Upgrading Software Over Isdn; Upgrading Software Over The Lan - Polycom ViewStation SP128 User Manual

Chapter 4
ViewStation SP User Guide

Upgrading Software over ISDN

The software on the ViewStation SP can be upgraded using an
H.320 video call only from another ViewStation SP. Upgrading
software over ISDN can only be done with a ViewStation of the exact
model.
You can perform a software upgrade to the far site over your ISDN
line during a call. Upgrading works best at 384 Kbps.
Caution Do not power off the ViewStation SP during the software
update process. If you power off a ViewStation SP during the
download process, the ViewStation SP reverts to its original
software version.
The ViewStation SP automatically restarts, once the software
upgrade process is complete.
Complete the following steps to upgrade a system:
1. Place a video call to the far site ViewStation SP.
2. Select System Info > Admin Setup > Security and write down
the passwords that appear on the Security screen of the site
you want to upgrade.
3. On the site sending the software, select System Info > Admin
Setup > Software/Hardware > Software Update to access the
Software Update screen.
4. Highlight the Start icon and press the SELECT button on the
remote control.
5. Enter the passwords that you wrote down in Step 2, highlight the
Start icon, and press the SELECT button on the remote control
to begin the upgrade process.

Upgrading Software over the LAN

You can use the SoftUpdate application to upgrade your software
over the LAN.
Complete the following steps to upgrade your ViewStation SP
software:
1. Download the latest software from www.polycom.com and
save it on your PC. If you do not have internet access, your
reseller can supply you with the application.
Using the ViewStation SP with a PC
124 www.polycom.com