Polycom ViewStation SP128 User Manual page 32

Chapter 1
ViewStation SP User Guide
Figure 1-13. ViewStation SP128 Auto Detect SPIDs Screen
To manually enter the SPID numbers for the ViewStation
SP128 as shown in Figure 1-13, highlight each line and
channel and press the SELECT button on the remote control.
Enter the SPID numbers accordingly.
Note If the ViewStation SP is unable to find the SPIDs, check the
network connection and verify that the ISDN numbers have
been entered correctly.
12. ISDN Switch Protocol:
Select the ISDN switch protocol according to the ISDN switch
type used with the ISDN network as shown in Figure 1-14.
14
Getting Started
www.polycom.com