Chapter 3
Pan, Tilt, and Zoom for the ViewStation SP Camera
Setting Camera Presets
ViewStation SP User Guide
To adjust the pan or tilt of a camera, use the ARROW buttons on the
remote control.
•
To pan to the left, press the LEFT ARROW button
•
To pan to the right, press the RIGHT ARROW button
•
To tilt up, press the UP ARROW button
•
To tilt down, press the DOWN ARROW button.
To zoom in, press the top (+) of the ZOOM button on the remote
control.
To zoom out, press the bottom (
control.
These adjustments comply with the Camera Direction - Reversed
option on page 66.
The ViewStation SP can be set to store up to ten preset camera
positions and zoom settings for up to four near site cameras and the
main far site camera. To set a preset:
1. Use the FAR or NEAR buttons on the remote control to select
the near or far site camera.
•
Press the FAR button twice displays 10 preset icons for the
FAR camera.
•
Press the NEAR button once displays 10 preset icons for
the NEAR camera.
2. Position the camera using the ARROW buttons and the ZOOM
control on the remote control.
3. Press the SELECT button on the remote control.
The camera preset circles are displayed on the main television
monitor:
•
0-9 for the far camera
•
0-9 for the near camera.
If a camera preset circle is transparent, the preset is empty. If the
circle is solid yellow, the preset is already assigned. To clear all
of the presets, press the # key on the remote control.
−
) of the ZOOM button on the remote
90
Using the ViewStation SP
www.polycom.com