Polycom ViewStation SP128 User Manual page 51

Chapter 2
© Polycom, Inc.
Service Profile Identifier (SPIDs)
The Service Profile Identifiers screen (System Info > Admin
Setup > Video Network > IMUX > SPIDS) or SPIDs appears only if
United States or Canada is selected as the country. If the
ViewStation SP is connected to an internal phone system (PBX), a
SPID may not need to be entered.
Note If the ViewStation SP is unable to find the SPIDs, check the
network connection and verify that the ISDN numbers have
been entered correctly.
• Enter the SPID numbers provided by the ISDN service
provider.
• If the ViewStation SP is connected to a PBX, select the
PBX icon, since you may not need to locate SPIDs.
• To auto-detect the SPID numbers, highlight the Start
icon and press the SELECT button on the remote
control.
Note If this process is canceled, the ViewStation SP reboots and
the entire setup procedure must be redone.
Figure 2-10. Auto Detect SPIDs Screen
33
Optional Configurations
ViewStation SP User Guide