Chapter 4
ViewStation SP Web Interface Icons
ViewStation SP User Guide
Manual Dial: To place a video call manually, click on the Manual
Dial tab on the top of the browser screen.
1. Choose the method of call type:
•
For H.323 calls: Enter the IP or DNS address of the far site
in the Video A text area.
Figure 4-16. Manual Dial Screen
•
For H.320 calls: Enter the primary ISDN number in the
Video A text area. Then enter the secondary ISDN number
in the Video B text area.
2. Select the line speed to be used for the call.
3. Click the CALL button.
4. When a call is established, the monitor screens (as shown in
Figure 4-15) appear.
5. To disconnect a call, click on the HANG UP button.
The ViewStation SP web interface contains a set of tools located in
the System Information and Remote Management pages of the
web interface. These tools are used in the remote management of
the ViewStation SP. The following icons are the counterparts to the
ViewStation SP Admin Setup screen.
Note
Some icons and associated screens only apply to
ViewStations with optional configurations. The following
table lists icons common to all ViewStation SP models.
Using the ViewStation SP with a PC
112
www.polycom.com