Using the ViewStation SP
Placing and Answering Calls
Main Calling Screen
© Polycom, Inc., 2001
This chapter describes how to use ViewStation SP functions.
This section describes how to place and answer calls using the
ViewStation SP.
When the ViewStation SP is powered on, the Main Calling screen
is displayed. The Main Calling screen is essentially the same for
ViewStation SP384 and ViewStation 128 models. The screen for the
ViewStation SP384 is shown in Figure 3-1.
Figure 3-1. ViewStation SP384 Main Calling Screen
Note
When the ViewStation SP is initially set up or when the
system has been manually reset, a series of setup screens
appears to establish language, country, and system
settings.
73
3
ViewStation SP User Guide