Download Print this page
Polycom Vortex EF2241 Quick Installation Manual
Polycom Vortex EF2241 Quick Installation Manual

Polycom Vortex EF2241 Quick Installation Manual

Soundstation vtx 1000 package
Hide thumbs Also See for Vortex EF2241:

Advertisement

Loudspeaker Installation
Loudspeakers should be installed and connected before powering up the system.
For each loudspeaker:
1.
Remove two ceiling tiles (indicated by the black squares in Diagram A at right). You will
place the loudspeaker in one space and use the second space for making connections.
2.
Install the loudspeaker with the grille facing into the room (Diagram B). See the loudspeaker
installation instructions for more information.
3.
When both loudspeakers have been placed in the desired ceiling locations, connect them in
parallel (per the Loudspeaker Wiring instructions below) using the supplied plenum rated
speaker cable.
4.
After wiring connections have been made, re-install ceiling tiles in the empty spaces.
(Diagram C).
B
Each loudspeaker provides 120° coverage angle and has a sensitivity of at
least 85dB SPL 1W/1m. As shown at right, assuming a 9 foot (2.7m) ceiling
height and a 3.5 foot (1.1m) ear height, the loudspeaker coverage pattern is a
circle with a 19 foot (5.8m) diameter (drawn from the center of the loudspeak-
er). A 10 foot (3m) ceiling height yields a 22 foot (6.7m) radius of coverage.
Using the 10 foot (3m) ceiling height as the worst case scenario and assuming
that the Vortex EF2241 amplifier is providing 1W to the loudspeaker, the listen-
er will hear a signal with 79dB SPL.
Loudspeaker Wiring
The two supplied loudspeakers must be connected in parallel to ensure correct
operation. Connect the positive (+) wire of each loudspeaker, along with a wire
from the cable running to the positive (+) terminal of the Vortex EF2241's loud-
speaker connections, together using a wire cap. Repeat the process for the neg-
ative (-) wires and terminal connection on the Vortex EF2241.
Please refer to the respective User Guides for each product for detailed installation, warranty and support information.
Copyright © 2004, Polycom, Inc. All Rights Reserved. Polycom, the Polycom logo, and Vortex are registered trademarks and SoundStation VTX 1000, VSX 7000, Conference Composer and InstantDesigner are trade-
marks of Polycom, Inc. in the USA and various countries. All other trademarks are the property of their respective companies. Part #1725-80129-001 Rev. 08/04.
C
To Vortex EF2241 loudspeaker
+
connection
+
Loudspeaker 1
+
Loudspeaker 2
-
Loudspeaker 1
To Vortex EF2241 loudspeaker
-
Loudspeaker 2
-
connection
A
Package 1 - Boundary Microphones, Ceiling Tile Loudspeakers
Quick Installation Guide
Vortex
®
EF2241 - SoundStation VTX 1000
Installed Voice System with Wideband Telephone Connection, Boundary
TM
Microphones and Ceiling Tile Loudspeakers
Connect. Any Way You Want.
Package

Advertisement

loading

Summary of Contents for Polycom Vortex EF2241

  • Page 1 Please refer to the respective User Guides for each product for detailed installation, warranty and support information. Copyright © 2004, Polycom, Inc. All Rights Reserved. Polycom, the Polycom logo, and Vortex are registered trademarks and SoundStation VTX 1000, VSX 7000, Conference Composer and InstantDesigner are trade-...
  • Page 2 10. Connect Output B of the Vortex EF2241 (item E in diagram at left) to the external audio input of your video codec (item I). 11. Connect an external audio output of your video codec (item J in diagram at left) to Line Input B of the Vortex EF2241 (item G). Note that only one channel of your video codec’s external audio will be used.

This manual is also suitable for:

Soundstation vtx 1000