Chapter 2
ViewStation SP User Guide
Note
The gateway place calls if the bandwidth number
corresponds to the correct line speed. For example:
An invalid speed is 255. Valid bandwidth speeds are listed
on the Gateway screen shown in Figure 2-26. The Gateway
rejects this value and does not connect the call.
The Gateway configuration has no effect if a gatekeeper or gateway
is not used.
Gatekeeper
The Gatekeeper screen (System Info > Admin Setup >
LAN/H.323 > Gatekeeper) shown in Figure 2-27 is used to enable,
disable or configure an H.323 gatekeeper.
Off: The gatekeeper is not used. The Gatekeeper IP Address
text field is not accessible.
Specify: The gatekeeper is used. Enter the gatekeeper IP
address in the grey text box. Contact the LAN Manager to obtain
the gatekeeper IP address.
Auto: When set to Auto the ViewStation SP automatically
searches for the presence of an available gatekeeper. If a
gatekeeper is not used and Auto has been selected, the
ViewStation SP remains in Auto mode until changed.
Figure 2-26. Gateway Screen
48
Optional Configurations
www.polycom.com