Polycom ViewStation SP128 User Manual page 29

Chapter 1
© Polycom, Inc.
An Auto H.323 Dialing check box appears below the H.323
extension (E.164). Complete the following steps to enter
information on the H.323 Setup screen.
1. Enter a name in the H.323 name when calling this
system text box. Select name which is easy to remember
such as the name of the conference room.
2. Enter the H.323 extension (E.164). E.164 is a naming
scheme based on the ViewStation SP serial number and
MUST be unique to each ViewStation SP system.
3. Uncheck the Auto H.323 Dialing check box if displayed.
9. A network gatekeeper provides terminal gateway registration,
address resolutions, bandwidth and admission control. It is
commonly used for point-to-point Internet video calls.
A gatekeeper is not required for point-to-point Intranet video
calls. Select one of the following options for Gatekeeper:
Figure 1-9. ViewStation SP Gatekeeper Screen
• Off - Gatekeeper is not used.
• Specify - Enter the Gatekeeper IP address.
• Auto - The ViewStation SP automatically searches for a
Gatekeeper on the LAN. If no Gatekeeper is used, the
ViewStation SP continues to search for a gatekeeper until
this setting is changed. If the LAN has more than one
Gatekeeper, specify the correct Gatekeeper manually.
10. On the ISDN Video Numbers screen, complete the following:
• Enter the area or STD code.
11
Getting Started
ViewStation SP User Guide