Dialing Rules 2; Global Management - Polycom ViewStation SP128 User Manual

Chapter 2
ViewStation SP User Guide
Private Network Dialing Prefix: Enter the dialing prefix required
to dial within a private network. This prefix is normally used to
access an organization from inside the private network.

Dialing Rules 2

The Dialing Rules 2 screen (System Info > Admin Setup >
LAN/H.323 > Global Address > Dialing Rules 2) is used to set
network dialing prefixes for different area codes.
Figure 2-35. Dialing Rules 2 Screen
If the private network requires a dial prefix to access certain area
codes (or city codes), set these prefixes on this screen. This prefix
is dialed before the area code. For example, some sites require a 9
before dialing a 1-800-xxx-xxxx number.
Enable the Always Dial Area Code option if you must dial the area
code to sites that have the same local area code as the ViewStation
SP. This is sometimes necessary for 10-digit dialing.

Global Management

The Global Management screen (System Info > Admin Setup >
LAN/H.323 > Global Management) is used to remotely monitor,
configure and maintain the ViewStation SP from a remote location.
To use the Global Management feature, your organization must use
Polycom Global Management System

58
Optional Configurations
software.
www.polycom.com