Answering A Video Call; Manual; Auto-Answer; Receiving A Multi-Point Call - Polycom ViewStation SP128 User Manual

Chapter 3

Answering a Video Call

Receiving a Multi-Point Call

© Polycom, Inc., 2001
This icon lets you save a global address entry to your local
address book.
This icon delete addresses from the ViewStation SP.
For more information about GMS software, see the Polycom Web
site at www.polycom.com.
There are two separate modes for answering video calls.

Manual

When the ViewStation SP receives an incoming call, a dialog
box is displayed asking the user whether or not the call is to be
answered. To answer the call, select YES. To refuse the call,
select NO.

Auto-answer

By default, the ViewStation SP automatically answers any
incoming call. To change the answering mode, go to the
General Setup screen (System Info > Admin Setup >
General Setup). In the Auto Answer field, place a check mark
to enable automatic answering. To use manual answering
mode, the Auto Answer field must be unchecked.
The ViewStation SP384 and SP128 are capable of receiving
multi-point calls from another multi-point enabled ViewStation. The
following section describes how to use the multi-point features when
in a multi-point call.

Using Chair Control in a Multi-point Call

Chair control is a feature that lets any non-Multi-point enabled
ViewStation view a multi-point call and:
• Select which sites to view
85
Using the ViewStation SP
ViewStation SP User Guide