Table of Contents
Advertisement
27.3.3 Network Service—[3-3] Client Feature—SNMP Agent
27.3.3 Network Service—[3-3] Client Feature—SNMP Agent
Using SNMP (Simple Network Management Protocol), it is possible for a PC assigned as an SNMP manager
to manage and receive PBX system status information, such as alarm information and general system activity.
The related PBX system settings can be programmed.
This option is only available at Installer level.
SNMP agent
Enables the PBX to use its SNMP agent function.
Value Range
Disable, Enable
Feature Guide References
2.4.4 Simple Network Management Protocol (SNMP) System Monitor
SNMP version
Specifies the version of the SNMP protocol to use.
Value Range
SNMP V1, SNMP V2c
Feature Guide References
2.4.4 Simple Network Management Protocol (SNMP) System Monitor
SNMP manager port
Specifies the SNMP manager port.
Value Range
161, 1024–65535
Feature Guide References
2.4.4 Simple Network Management Protocol (SNMP) System Monitor
MIB info—SysContact
Specifies the name and contact information of the system administrator.
Value Range
Max. 255 characters
Feature Guide References
2.4.4 Simple Network Management Protocol (SNMP) System Monitor
822
PC Programming Manual
Advertisement
Table of Contents
