Table of Contents
Advertisement
Feature Guide References
5.2.2 SIP (Session Initiation Protocol) Extension
Connection
Indicates the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port.
This option is only available in On-line mode.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Feature Guide References
5.2.2 SIP (Session Initiation Protocol) Extension
Password
Specifies the password used for registering a SIP phone to the PBX. This parameter can only be modified
when the virtual SIP extension port is set to OUS.
Value Range
4–16 characters (consisting of 0–9, a–z, A–Z)
Feature Guide References
5.2.2 SIP (Session Initiation Protocol) Extension
Status
Indicates whether a certain SIP phone is registered (reference only).
Value Range
None, Registered
Feature Guide References
5.2.2 SIP (Session Initiation Protocol) Extension
IP Phone Registration ID (MAC Address)
Specifies the MAC address of the SIP phone.
This parameter can only be modified when Connection on this screen is set to OUS.
Value Range
00:00:00:00:00:00–FF:FF:FF:FF:FF:FF
Feature Guide References
5.2.2 SIP (Session Initiation Protocol) Extension
9.20 PBX Configuration—[1-1] Configuration—Slot—V-UTEXT—Port Property
PC Programming Manual
289
Advertisement
Table of Contents
