Table of Contents
Advertisement
7.4.7 Utility—Monitor/Trace—E1 Line Trace
7.4.7 Utility—Monitor/Trace—E1 Line Trace
Traces the sent and received signalling bits and dial numbers on the specified channel of the E1 line card. This
utility is intended for use by dealers.
For information about Expansion Units, see 9.32 PBX Configuration—[1-1]
Configuration—Slot—Expansion Unit1/Expansion Unit2/Expansion Unit3.
This option is only available at Installer level, and requires that the target card be set to INS status.
To view trace data
1.
From the Shelf-Slot No. drop-down list, select the target slot. Each card will be preceded by a 2-digit
number, following the pattern "X-Y":
•
X: Shelf number (1-4)
–
1: KX-NS300 basic unit
–
2: Expansion Unit1
–
3: Expansion Unit2
–
4: Expansion Unit3
•
Y: Slot number (1-7)
2.
From the CH No drop-down list, select the target channel.
3.
Click Start.
Trace information will be displayed. The information is automatically updated whenever the data being
monitored changes.
4.
Click Stop to end the trace.
5.
Select an option:
•
Click Capture to save the displayed trace information.
Information will be saved to the PC as a text-format file.
•
Click Clear to erase the information.
120
PC Programming Manual
Advertisement
Table of Contents
