Table of Contents
Advertisement
9.20 PBX Configuration—[1-1] Configuration—Slot—V-UTEXT—Port Property
1.
Click Forced De-registration.
A dialogue box will appear. Registered extension numbers and names are displayed on the left.
2.
Highlight numbers and names and click the right arrow to select them for forced de-registration. Click
Next.
A dialogue box will appear.
3.
Click OK.
A dialogue box will appear.
4.
Click Confirm.
If the de-registration is successful, the dialogue box will show "Forced De-registration Succeed".
5.
Click Close.
Once the device is successfully de-registered, the status of the device will update to show "None".
Main
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Extension Number
Specifies the extension number of the port.
Value Range
Max. 5 digits (consisting of 0–9)
Feature Guide References
5.2.2 SIP (Session Initiation Protocol) Extension
Extension Name
Specifies the extension name of the port.
Value Range
Max. 20 characters
Feature Guide References
5.2.2 SIP (Session Initiation Protocol) Extension
Telephone Type
Specifies the connected device type.
Note
•
This setting cannot be changed if a device has already been registered for the port. De-register the
device set for the port before changing the setting.
•
To change this setting when programming in Off-line mode, and a device is already registered to the
port, change the setting of
"00:00:00:00:00:00", and then click Apply. The setting can then be changed.
Value Range
UT: A KX-UT series SIP phone is connected.
288
PC Programming Manual
IP Phone Registration ID (MAC Address) for the port to
Advertisement
Table of Contents
