Table of Contents
Advertisement
9.11 PBX Configuration—[1-1] Configuration—Slot—V-IPGW—Shelf Property
Value Range
0–600 ´ 100 ms
T316
Specifies the maximum time that the PBX waits for a reply after sending the Restart message.
Value Range
0–3000 ´ 100 ms
T318
Specifies the maximum time that the PBX waits for a reply after sending the Resume message.
Value Range
0–600 ´ 100 ms
T319
Specifies the maximum time that the PBX waits for a reply after sending the Suspend message.
Value Range
0–600 ´ 100 ms
T322
Specifies the maximum time that the PBX waits for a reply after sending the Status enquiry message.
Value Range
0–600 ´ 100 ms
T3D3
Specifies the length of time after which the PBX tries to establish L2 in "Permanent" mode.
Value Range
0–3000 ´ 100 ms
T3D9
Specifies the length of time after which the PBX tries to disconnect L2 in "Call by Call" mode.
Value Range
0–3000 ´ 100 ms
250
PC Programming Manual
Advertisement
Table of Contents
