Table of Contents
Advertisement
Feature Guide References
2.9.1 Primary Directory Number (PDN)/Secondary Directory Number (SDN) Extension
Extension Name
Indicates the name of the extension, when an extension number is specified (reference only).
Value Range
Max. 20 characters
Dial (for One-touch)
Specifies the number to be dialled. The PBX can have a maximum of 2000 One-touch Dialling buttons for
extensions.
Value Range
Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])
Feature Guide References
2.6.2 One-touch Dialling
Dial (for ISDN Service)
Specifies the number required to access the telephone company's ISDN service.
Value Range
Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])
Feature Guide References
4.1.2.10 ISDN Service Access by Keypad Protocol
Dial (for NDSS)
Specifies the network extension number of the extension to be accessed using Network Direct Station
Selection.
Note that only extension numbers that have been previously registered in 17.4 PBX Configuration—[9-4]
Private Network—NDSS Key Table can be specified here.
Value Range
Max. 16 digits (consisting of 0–9)
Feature Guide References
4.2.5.1 Network Direct Station Selection (NDSS)
Label Name
Specifies the name of each flexible button for KX-NT366 IP-PTs. The name specified here is displayed on the
LCD for each button.
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button
PC Programming Manual
549
Advertisement
Table of Contents
