Table of Contents
Advertisement
11.12 PBX Configuration—[3-12] Group—VM(DTMF)
Group
11.12.1 PBX Configuration—[3-12-1] Group—VM(DTMF)
Group—System Settings
A Panasonic Voice Processing System (VPS) with DTMF Integration can be connected to SLT ports of the
PBX. The SLT ports that are connected to the VPS are called a VM (DTMF) Group. 2 VM (DTMF) Groups can
be programmed. For more information on Voice Mail groups and DTMF integration, see 2.28.1 Voice Mail
(VM) Group and 2.28.2 Voice Mail DTMF Integration in the Feature Guide.
VM DTMF Status Signal—Ringback Tone
Specifies the DTMF status signal the PBX sends to the VPS when the called extension is ringing.
Value Range
Max. 4 digits (consisting of 0–9, *, #, and P [pause])
VM DTMF Status Signal—Busy Tone
Specifies the DTMF status signal the PBX sends to the VPS when the called extension is busy.
Value Range
Max. 4 digits (consisting of 0–9, *, #, and P [pause])
VM DTMF Status Signal—Reorder Tone
Specifies the DTMF status signal the PBX sends to the VPS when the dialled number is invalid.
Value Range
Max. 4 digits (consisting of 0–9, *, #, and P [pause])
VM DTMF Status Signal—DND Tone
Specifies the DTMF status signal the PBX sends to the VPS when the called extension is in DND mode.
Value Range
Max. 4 digits (consisting of 0–9, *, #, and P [pause])
VM DTMF Status Signal—Answer
Specifies the DTMF status signal the PBX sends to the VPS when the called extension has answered the call.
Value Range
Max. 4 digits (consisting of 0–9, *, #, and P [pause])
11.12.1 PBX Configuration—[3-12-1] Group—VM(DTMF) Group—System Settings
PC Programming Manual
511
Advertisement
Table of Contents
