Panasonic KX-NS300CN Pc Programming Manual page 211

Value Range
Max. 100 characters
Account Setting—SIP Server IP Address
Specifies the IP address of the SIP proxy server. This setting is compulsory when not using the DNS server.
Note
Specify the IP address of the outbound proxy server, if provided by the SIP provider.
Value Range
1.0.0.0–223.255.255.255
Account Setting—SIP Service Domain / Proxy Domain (Max.100 characters)
Specifies the domain name provided by the SIP provider.
Value Range
Max. 100 characters
Property Setting—Select Service Provider
Select the SIP service provider after importing SIP service provider file.
Value Range
Max. 100 characters
Property Setting—Register Ability
Specifies whether to send the REGISTER message to the SIP server.
Value Range
Disable, Enable
Property Setting—Session Expire Timer (s)
Specifies the length of time that the PBX waits before terminating SIP sessions when no reply to the repeated
requests is received.
Value Range
90–3600 s
Property Setting—From Header - user Part
Specifies the value to be stored in the username part of the SIP-URI of the From header.
Value Range
User Name, Authentication ID, PBX-CLIP
9.4.2 PBX Configuration—[1-1] Configuration—Slot—VoIP Property—VoIP (Trunk) Setting
PC Programming Manual 211