Table of Contents
Advertisement
10.8.2 PBX Configuration—[2-8-2] System—Ring Tone
Patterns—Call from DOORPHONE
Different ring tone patterns can be selected for incoming doorphone calls depending on the doorphone port
that the calls originate from. A maximum of 8 Ring Tone Pattern Tables can be programmed, and any pattern
table can be selected for use by an extension.
Ring Tone Pattern Plan 1–8
Specifies the ring tone pattern for incoming doorphone calls.
Value Range
Single, Double, Triple, S-Double, Option 1, Option 2
PC Programming Manual References
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 1—
Pattern Table
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option 1—
Pattern Table
13.1 PBX Configuration—[5-1] Optional Device—Doorphone
Feature Guide References
2.1.3.2 Ring Tone Pattern Selection
2.18.1 Doorphone Call
10.8.2 PBX Configuration—[2-8-2] System—Ring Tone Patterns—Call from DOORPHONE
Ring
Ring
PC Programming Manual
421
Advertisement
Table of Contents
