Table of Contents
Advertisement
9.11 PBX Configuration—[1-1] Configuration—Slot—V-IPGW—Shelf Property
Value Range
96–127
T38 FAX Max Datagram
Specifies the maximum datagram size when using the T.38 protocol.
Value Range
272–512
T38 FAX UDPTL Error Correction – Redundancy
Specifies whether to enable the redundancy feature when using the T.38 protocol.
Value Range
Disable, Enable
T38 FAX UDPTL Redundancy count for T.30 messages
Specifies the redundancy count for T.30 messages when using the T.38 protocol.
Value Range
0–7
T38 FAX UDPTL Redundancy count for data
Specifies the redundancy count for data when using the T.38 protocol.
Value Range
0–3
T38 FAX Rate Management Method
Specifies the rate management method when using the T.38 protocol.
Value Range
Transferred TCF, Local TCF
Timer
T301
Specifies the maximum time that the PBX waits for a reply after making a call.
Value Range
0–18000 ´ 100 ms
T302
Specifies the maximum time allowed between each digit on an incoming call. Applies to overlap receiving.
248
PC Programming Manual
Advertisement
Table of Contents
