Simple Network Management Protocol (Snmp) System Monitor - Panasonic KX-TDE100 Features Manual

2.4 Fault Recovery/Diagnostics
2.4.4 Simple Network Management Protocol (SNMP) System
Monitor
Description
It is possible for a PC assigned as an SNMP manager to manage and receive PBX system status
information, such as alarm information and general system activity using SNMP. Management Information
Bases (MIBs) are sent to a PC (i.e., the SNMP manager) connected to the PBX over a LAN and can then
be stored and analysed using SNMP manager software.
The two features for managing information using SNMP are as follows:
– Polling:
A bilateral transaction of information. Polling allows the manager to request information from the
PBX.
PBX
– TRAP:
An automatic relay of information from the PBX when a status change occurs or an alarm is
detected.
PBX
TRAP Implementation
The PBX will send the two types of TRAP as follows:
Type
Standard TRAP
Enterprise Specific
*
TRAP
*: Enterprise Specific TRAPs are original TDE exclusive information (Enterprise Specific MIB)
446 Feature Guide
Request
Response
Sends Information
TRAP Name
coldStart
Authentication
Failure
Major Alarm
Minor Alarm
PC
Manager
PC
Manager
Description
Information is sent after turning on the power of the
PBX or resetting the PBX.
Information is sent when an unregistered Community
Name and/or Manager IP address is entered.
Information is sent when a major alarm is detected.
Information is sent when a minor alarm is detected.