Table of Contents
Advertisement
9.30 PBX Configuration—[1-1] Configuration—Slot—Card Property—E1 type MFC-R2 Setting 2
Value Range
Undefined, 1–15
Group-A Code Assignment—(N-1) Request
Specifies the code used to request the telephone company to send the (N-1)th digit of an ANI number.
Value Range
Undefined, 1–15
Group-A Code Assignment—(N-2) Request
Specifies the code used to request the telephone company to send the (N-2)th digit of an ANI number.
Value Range
Undefined, 1–15
Group-A Code Assignment—(N-3) Request
Specifies the code used to request the telephone company to send the (N-3)th digit of an ANI number.
Value Range
Undefined, 1–15
Group-B Code Assignment—Idle (1)
Specifies the code used normally to inform the telephone company that the status of the called destination is
idle.
Value Range
Undefined, 1–15
Group-B Code Assignment—Idle (2)
Specifies the code used in special circumstances, such as an international call, to inform the telephone
company that the status of the called destination is idle.
Value Range
Undefined, 1–15
Group-B Code Assignment—Idle (3)
Specifies the code used to inform the telephone company that the status of the called destination is idle when
the call is disconnected by the caller.
Value Range
Undefined, 1–15
Group-B Code Assignment—Busy
Specifies the code used to inform the telephone company that the status of the called destination is busy.
PC Programming Manual
335
Advertisement
Table of Contents
