Table of Contents
Advertisement
10.10 PBX Configuration—[2-10] System—Extension CID Settings
Caller ID Signal Type
Specifies the type of signal modulation to be used when sending Caller ID information to an SLT (reference
only).
Value Range
FSK
Feature Guide References
2.19.1 Caller ID
Additional Local Trunk Access Code to Extension Caller ID
Enables the PBX to automatically add a Trunk Access number to the received telephone number when sending
the Caller ID number of an incoming trunk call to an SLT.
Value Range
Disable, Enable
Feature Guide References
2.19.1 Caller ID
Send Caller ID Date & Time to Extension
Enables the PBX to send the date and time of an incoming call when sending Caller ID information to an SLT.
Value Range
Disable, Enable
Feature Guide References
2.19.1 Caller ID
Send Caller ID Name to Extension
Enables the PBX to send the caller's name when sending Caller ID information to an SLT.
Value Range
Disable, Enable
Feature Guide References
2.19.1 Caller ID
Send Caller ID Long Distance to Extension
Enables the PBX to send a call qualifier (Long Distance) (if received from the trunk) when sending Caller ID
information to an SLT.
448
PC Programming Manual
Advertisement
Table of Contents
