Table of Contents
Advertisement
10.1.1 PBX Configuration—[2-1-1] System—Date & Time—Date & Time Setting
10.1 PBX Configuration—[2-1] System—Date & Time
10.1.1 PBX Configuration—[2-1-1] System—Date & Time—Date
& Time Setting
The date and time of the PBX can be programmed. The date and time will be shown on the display of extensions
(e.g., PT, PS).
This screen can be accessed only in On-line mode.
Date & Time
Indicates the current date and time. Values can be entered by clicking the parameter you want to change and
typing the new value, or by clicking the up/down arrows beside the date and time.
Note
•
When this setting is changed and applied, it may take between 1 minute and several hours (depending
on the configuration of the PBX network) for all connected IP-PTs to reflect this change on their displays.
•
At default settings, KX-UT series SIP phones synchronise to the PBX's date and time once every hour.
Value Range
Year: 2000–2035
Month: 01–12
Day: 01–31
Hour: 00–23
Minute: 00–59
Second: 00–59
354
PC Programming Manual
Advertisement
Table of Contents
