9.30 PBX Configuration—[1-1] Configuration—Slot—Card Property—E1 type MFC-R2 Setting 2
9.30 PBX Configuration—[1-1]
Configuration—Slot—Card Property—E1 type
MFC-R2 Setting 2
Group-A Code Assignment—Address Complete
Specifies the address complete (completion of dial reception) code sent to the telephone company.
Value Range
1–15
Group-A Code Assignment—ANI Request
Specifies the code used to request the telephone company to send an ANI number.
Value Range
1–15
Group-A Code Assignment—ANI (N+1)
Specifies the code used to request the telephone company to send the (N+1)th digit of an ANI number.
Value Range
1–15
Group-A Code Assignment—ANI (N+1) Additional Code
Specifies the second code when two codes are needed to request the telephone company to send the (N+1)th
digit of an ANI number.
Value Range
Undefined, 1–15
Group-A Code Assignment—Set up Speech Path
Specifies the setup speech path code sent to the telephone company.
Value Range
Undefined, 1–15
Group-A Code Assignment—(First) Request
Specifies the code used to request the telephone company to send the first digit of an ANI number.
Value Range
Undefined, 1–15
Group-A Code Assignment—(N) Request
Specifies the code used to request the telephone company to send the (N)th digit of an ANI number.
334
PC Programming Manual