Table of Contents
Advertisement
Value Range
Disable, Enable
DTMF
Specifies the method to transport DTMF tones.
Value Range
Inband, Outband (RFC2833), Outband (SIP INFO)
Payload Type
Specifies the payload type of RFC2833 for DTMF tones.
Note
Manual programming is required if DTMF is set to Outband (RFC2833).
Value Range
96–127
RTP/RTCP
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Connection
Indicates the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port.
This option is only available in On-line mode.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
RTP QoS Ability
Specifies the type of value to be stored in the ToS field in the IP header.
Value Range
ToS, DSCP, HEX
RTP QoS-ToS Priority
Specifies the priority level in the ToS field.
Value Range
0–7
9.10 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
PC Programming Manual
235
Advertisement
Table of Contents
