Table of Contents
Advertisement
9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
Feature Guide References
4.1.2.1 Integrated Services Digital Network (ISDN)—SUMMARY
Network Numbering Plan
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Port Type
Selects the port type.
Note
•
Each ISDN connection in a QSIG network must have a master port on one PBX and a slave port on
another PBX.
•
ISDN extensions can belong to an incoming call distribution group or idle extension hunting group. In
this case, an MSN can be assigned.
Value Range
CO: For connecting to public network
Extension: For connecting to extension
QSIG-Slave: For connecting to private network (slave port)
QSIG-Master: For connecting to private network (master port)
Connection
Indicates the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port.
This option is only available in On-line mode.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Trunk Property
Selects the trunk property of the port.
Value Range
Public: Public network
Private: Private Network
VPN: Virtual Private Network
Feature Guide References
4.2.1 TIE Line Service
4.2.3 ISDN Virtual Private Network (ISDN-VPN)
Calling Party Number—Numbering Plan ID—Public, Private
Selects the numbering plan ID that applies to outgoing trunk calls routed through public and private networks.
322
PC Programming Manual
Advertisement
Table of Contents
