Table of Contents
Advertisement
16.3.1 PBX Configuration—[8-3] ARS—Routing Plan Time—Time
Setting
The start times of a maximum of 4 different time blocks can be programmed for each day of the week, for the
selected Routing Plan. Each time block automatically ends when the subsequent block begins.
Time-A–D—Setting
Enables the setting of the start time for each time block.
Value Range
Disable, Enable
Feature Guide References
2.8.1 Automatic Route Selection (ARS)
Time-A–D—Hour, Minute
Specifies the start time for each time block.
Note
Time-A must be the earliest block in the day, and the following blocks must be set in chronological order.
Correct programming example:
Time-A: 8:00
Time-B: 17:00
Time-C: 21:00
Incorrect programming example:
Time-A: 8:00
Time-B: 13:00
Time-C: 11:30
Time-D: 17:00
Value Range
00:00–23:59
Feature Guide References
2.8.1 Automatic Route Selection (ARS)
16.3.1 PBX Configuration—[8-3] ARS—Routing Plan Time—Time Setting
PC Programming Manual
651
Advertisement
Table of Contents
